African Flowers Bucket Bag

By -
I love the African Flower motif and suddenly just had the desire to make a bag for my knitting. Took a bit of playing around to figure out how to make the shape I wanted.
I wanted a bucket shaped bag. I ended up breaking the shapes down - I made a tube from the hexagons and then a circle for the base. I used half hexagons to give the tube a straight edge. I used Littleberry’s half hexagon pattern - though I restarted the yarn on the right hand side every round.

I used the magic circle technique for the centres and crocheted over the ends of the yarn and connected the hexagons as I went.
I managed to find some fabric in my stash that matched the colours of the cotton and used this for the lining. I made twisted cord from the cotton for the drawstring.

There was a bit of yarn leftover so I made a little drawstring pouch for my stitch markers.



Bag Construction

Make a tube with the hexagons, eight across and 4 high. Make 8 half hexagons for the top and bottoms to make the edge straight. I found it easiest to attach the motifs as I went. This tutorial is good for making the hexagons



Complete a round of sc (UK dc) around the top and bottom of the bag. Now at the top of the bag make the section where the drawstring will be. Work a round of dc (UK tr), turn, and work another round of dc (UK tr). It is important to turn to make a gap for the drawstring. See the photo below. Continue in this manner until this is about 1 inch deep. Fasten off



Using a bit of geometry I worked out how big the base circle wanted to be ( I measured the width of the tube and multiplied it by 2 to find the perimeter - then divide it by pi (3.14) this should  give the diameter of the circle)


Base

For my bag I had to make a base 17.5 cm in diameter.


Using a magic circle or chain 4 and slip stitch to make a ring. 
Round 1:    8hdc (UK htr) in the ring
Round 2:    Ch3 and dc in same stitch, *2dc (UK tr) in each dc, repeat from *
Round 3:    Ch3 and dc in same stitch, 1dc *2dc in next stitch, 1 dc repeat from *
Round 4:   Ch3 and dc in same stitch, 2dc *2dc in next stitch, 2 dc repeat from *
Continue in this manner until you reach the desired size. For me, my final round was Ch3 and dc in same stitch, *2dc in next stitch, 10 dc repeat from *


I changed colours on my base to use up some of the oddments of colour.



Lining
To make the lining, cut a rectangle and a circle the same size as the bag (plus seam allowances). Make these into a bag shape. I attached the base of the lining to the base of the bag so it can't be pulled out when you are taking your knitting out or other goodies!. Fold over the top of the lining and sew down to the top of the inside of the bag. I used monofilament to do this as it doesn't show if your sewing is messy. If not using monofilament make sure you use blind hemstitch so it looks neat.

I made a twisted cord for the drawstring - using two different colours. Cut 2 pieces of yarn twice the length of the final length of the drawstring. Knot them together and put this end over something solid (like a door handle). Keep twisting this until you can't twist it easily much more. Place a weight in the centre of the cord - like your sewing scissors and fold the cord together. The cord should twist together.

Fold over the crocheted edge and sew the edge of this to the inside of the bag. To make life easier I put the drawstring inside before sewing it up so I didn't have to lace it through. I put beads on the end and a toggle on the drawstring. Voila, one bucket bag.



Comments

  1. Michele10 March 2012 at 18:57

    This is gorgeous and even better in real life x

    ReplyDelete
  2. Anonymous12 March 2012 at 10:38

    I have seen this in 'the flesh' and it is stunning...I want one!!!

    ReplyDelete
  3. traceroy9816 April 2012 at 21:25

    Absolutely beautiful also seen in real life and love it. Hopefully one day I'll be as professional ;) I want one too x

    ReplyDelete
  4. Di24 January 2014 at 17:12

    So adorable... love it!! ;)

    ReplyDelete
  5. Dawn B.11 March 2014 at 00:24

    Thanks so much for sharing. This is so pretty.

    ReplyDelete
  6. Bugluver11 April 2018 at 04:01

    I'm a crocheter and would really like the pattern for the stitch marker pouch :)

    ReplyDelete
    Replies
    1. hardybarn12 April 2018 at 08:06

      The details are on my Ravelry project page. Link here

      https://www.ravelry.com/projects/snowywolf/african-flower-hexagon-2

      Delete
  7. Carol12 March 2020 at 01:16

    Very pretty! Very good choice of colors also!! 👍🏻❤️

    ReplyDelete

Post a Comment

Popular posts from this blog

Substituting Yarn in a Project

By -
Image
So you’ve chosen your pattern, but either you don’t want to use the recommended yarn or you can’t find it to buy. This does not mean you are stuck. Many knitters, especially when they are just learning to knit, get stuck on the idea that you can only use the yarn that the pattern is written with. There are, occasionally, a few projects where it can be quite hard to find an alternative but that is very rare. There are a few factors that you want to think about when changing yarn.  Yarn Thickness The main one is the thickness of the yarn. This is the one factor that you absolutely have to consider. Everything else that I discuss below helps to hone your decision down but yarn thickness is at the core of a project. If you use a thicker yarn, it could make the fabric too dense and often make it impossible to match the gauge of the pattern. If you use a thinner yarn, then it will be more open and airy than intended; there’s more scope with this but some projects such as toys an...
Read more

Photo Tutorial: How to Back a Knitted Blanket

By -
Image
Recently, I was asked to help out with a project. This wonderful blanket (designed by Debbie Abrahams from her book, Blanket and Throws to Knit ) was knitted by Ann. I was asked to piece it together and back it. The finished blanket is being used to raise money for When you Wish Upon a Star. The yarn was donated by A Good Yarn and the fabric and cotton by L & C Fabrics . I thought I’d show you how I went about backing the blanket, I went about it as I would a quilt. Though, I decided tying would be the best way of layering it together, as traditional quilting would be difficult on a knitted fabric. 1. Block the blanket. I pinned it out and spritzed it. Normally, I would wet block, but I was concerned that the red may bleed and it would take some time to dry too. 2. My blanket was too large for a standard width so I pieced the backing. The backing should be a few inches larger than the knitted blanket. Place it right side down on the floor. I then tape it down o...
Read more

Photo Tutorial: Estonian Cast On

By -
Image
I've recently been looking into different cast on methods. I've tried quite a few and they've all got their purpose but I have taken quite a fancy to the Estonian Cast On (a.k.a. Double Start, Latvian). It's quite simple to execute, it's stretchy and can be quite decorative too. It works well with 1 x 1 and 2 x 2 ribbing because it wraps around the base of the column of ribbing. It's a super cast on for socks. The tutorial is for the single strand method. 1. Measure out a long tail. I tend to use 1 inch per stitch for thicker yarn and 1/2 inch per stitch for DK weight and thinner; plus another 6 inches for luck! Make a slip knot and place on your needle. 2. Place your fingers between the strands and tilt your hand back into a catapult position. This creates a cross on the thumb strand. 3. Insert your needle into the loop around your thumb from below. 4. Reach across over the top of the strand on your forefinger. 5. ...
Read more