Reversible Box Tote

By -
The sewing machine came out this week! I saw the most gorgeous knitting bag on instagram. It was made by Truly Myrtle (I don’t usually like podcasts but she’s very interesting to listen to). Here’s the link to her bag.

It’s a shape I haven’t tried before. The pattern for the tote is a free one from Very Shannon. - the Reversible Box Tote.

I bought some gorgeous fabric from The Little Fabric Store. It’s a sweet, little shop and worth a visit, if you’re near. Helen is very lovely and helpful. I got some new Cloud9 fabric and linen to line the bag.

2015-03-13 17.36.47

I bought another Clover tape measure too. They are really nice quality. I’ve found with the cheaper retractable tape measures that the tape will stretch and warp with use. I’ve had one for over a year (with daily use) and it is still as straight as the day I bought it. So I bought another because well…you can never have enough tape measures!

You can see the tape measure in the picture below.

RaviWIP

The fabric that I chose happened to be what I'd used as inspiration for a stitch pattern that I'd created.



I used some cheap fusible fleece that I had in my stash – so it’s not got as much form as I’d like. Next time, I’ll use better quality.

P3152821

I love my new bag anyway and have been carrying it around with me!

I haven’t finished any knitting projects this week. The two I’ve been working on are an Artemisia jumper from the latest Rowan Magazine 57. I’m using the yarn from the pattern which is Rowan Softknit Cotton and amazingly I have spot-on gauge with the same size needles for the pattern, which makes a nice change. Though I have altered the pattern and the shaping to make it a few inches longer.

P3182837

I bought Designer Knitting Magazine 2014/15 and there was an interesting article by Meg Swansen about different increases – including a few that I hadn’t done before. I’ve tried out one that she names kibosirb (knit into the back of stitch in row below) for this jumper and it’s quite a neat increase. Can you see it on the left hand side?

P3182833

I started a selfish knitting project which is an Epistropheid by Kate Davies but this didn’t go particularly well the first time. I went up 2 needle sizes and hoped for the best, as I didn’t do a swatch (swatches are nearly as big as the hat so it’s sometimes easier to gamble). I did a couple of inches and it wasn’t looking hopeful – so I steamed blocked what I had and instead of 24 sts in 4 inches, I had 27. It was going to be way too small.

So I frogged it. The gauge was as loose as I wanted to go with this yarn, so instead of trying to meet gauge. I’ve added a repeat of the pattern instead. It’s looking ok so far. (I’m electing to forget about the fiasco of forgetting to change to the larger needle for the body of the hat). I fear that this is going to be one of the ill-fated projects, where nothing goes right!

Epistropheid1

Comments

  1. Anonymous18 March 2015 at 20:28

    A shame about the hat, but it's such a lovely pattern that I hope it will work out with the extra pattern repeat. I love the fabric of your bag so much!

    ReplyDelete
  2. The Little Fabric Store27 March 2015 at 11:20

    Thanks for your lovely comments and visiting my shop. I love the bag, the fabrics work so well together. Great blog too, very inspiring - Helen - @ The Little Fabric Store

    ReplyDelete
  3. steph8 April 2015 at 13:15

    this is like seeing someone's inspiration board! you have so many great things going on....really love the bag and the hat!! fingers crossed that the extra repeat does the trick. It's going to be a stunner!

    ReplyDelete

Post a Comment

Popular posts from this blog

Substituting Yarn in a Project

By -
Image
So you’ve chosen your pattern, but either you don’t want to use the recommended yarn or you can’t find it to buy. This does not mean you are stuck. Many knitters, especially when they are just learning to knit, get stuck on the idea that you can only use the yarn that the pattern is written with. There are, occasionally, a few projects where it can be quite hard to find an alternative but that is very rare. There are a few factors that you want to think about when changing yarn.  Yarn Thickness The main one is the thickness of the yarn. This is the one factor that you absolutely have to consider. Everything else that I discuss below helps to hone your decision down but yarn thickness is at the core of a project. If you use a thicker yarn, it could make the fabric too dense and often make it impossible to match the gauge of the pattern. If you use a thinner yarn, then it will be more open and airy than intended; there’s more scope with this but some projects such as toys an...
Read more

Photo Tutorial: How to Back a Knitted Blanket

By -
Image
Recently, I was asked to help out with a project. This wonderful blanket (designed by Debbie Abrahams from her book, Blanket and Throws to Knit ) was knitted by Ann. I was asked to piece it together and back it. The finished blanket is being used to raise money for When you Wish Upon a Star. The yarn was donated by A Good Yarn and the fabric and cotton by L & C Fabrics . I thought I’d show you how I went about backing the blanket, I went about it as I would a quilt. Though, I decided tying would be the best way of layering it together, as traditional quilting would be difficult on a knitted fabric. 1. Block the blanket. I pinned it out and spritzed it. Normally, I would wet block, but I was concerned that the red may bleed and it would take some time to dry too. 2. My blanket was too large for a standard width so I pieced the backing. The backing should be a few inches larger than the knitted blanket. Place it right side down on the floor. I then tape it down o...
Read more

Photo Tutorial: Estonian Cast On

By -
Image
I've recently been looking into different cast on methods. I've tried quite a few and they've all got their purpose but I have taken quite a fancy to the Estonian Cast On (a.k.a. Double Start, Latvian). It's quite simple to execute, it's stretchy and can be quite decorative too. It works well with 1 x 1 and 2 x 2 ribbing because it wraps around the base of the column of ribbing. It's a super cast on for socks. The tutorial is for the single strand method. 1. Measure out a long tail. I tend to use 1 inch per stitch for thicker yarn and 1/2 inch per stitch for DK weight and thinner; plus another 6 inches for luck! Make a slip knot and place on your needle. 2. Place your fingers between the strands and tilt your hand back into a catapult position. This creates a cross on the thumb strand. 3. Insert your needle into the loop around your thumb from below. 4. Reach across over the top of the strand on your forefinger. 5. ...
Read more