Twisted Decreases

By -
I'm doing Sockdown again, this month. You'd have thought I'd been all socked out by now. I'm doing a pattern from the "Underappreciated" category - so any sock pattern that has less than 15 projects on Ravelry. I'm doing Phaeodaria by Hunter Hammersen, which is absolutely gorgeous and have no idea why it hasn't got more projects - though it's a relatively recent release. Incidently, the pattern was in the Sock Report, which are all patterns using sock weight yarn and there are some really gorgeous patterns in it. I "accidently" (imagine I said this with lots of irony!) bought all the patterns.



It's a twisted cable pattern and there are a couple of stitches that I'd not encountered before. Twisted decreases - described in the pattern by k2tog tbl and ssk tbl. I thought k2tog tbl was pretty self explanatory but was struggling to find a clear description of a ssk tbl. If you slip, slip and knit through the back loops, then in my mind that is what a regular ssk is. I later found out that it was a technical issue, if you're using any of the Sock Report patterns on an iPad, the interactive parts to the instructions don't show up in some apps. They work fine in GoodReader. I didn't realise until researching this blog that there was an interactive description of the techniques for these stitches; so the information is all there.

I tried to do a bit of research myself but information seemed to be a little sparse.

These are the versions of ssk tbl that I found.
  • Slip one purlwise, then next stitch knitwise and knit them together through the back loop;or
  • Slip both stitches knitwise one at a time, then back on the left needle and k2tog.
So I contacted the designer. It's not something I've done before and was exceedingly pleased with the super fast and clear response. I got an email back within half an hour! I was guided towards this video, which sorted me out nicely.

I'm going to describe them as left leaning twisted decrease and right leaning twisted decrease because otherwise I found it all a bit confusing - with people using different terms.

This is what I ended up doing:

Left leaning twisted decrease -  slip one purlwise, slip one knitwise, move both stitches back to the left hand needle and k2tog.
Right leaning twisted decrease - slip one knitwise, slip one purlwise and knit together through the back loops


Here is a close up of where I've used the twisted decreases, as you can see it allows you to use a decrease and move the twisted stitch without cables and still keep the column of twisted stitches going. 

The socks are now finished and already had a trip out. Oh and the other nice thing is the photo was requested to go on the pattern page on Ravelry, which is always lovely.




Comments

  1. Nic20 February 2013 at 22:07

    They are beautiful!! I want to be a speedy knitter!!!

    ReplyDelete
  2. 9crafty1123 February 2013 at 07:04

    Thanks for this info, was really most helpful!! Your socks are beautiful, & I have queued this to do in the near future!! With your tips of course!!

    ReplyDelete
  3. kushami7 April 2018 at 00:40

    Thank you, Joanne. I'm not making these socks, but found your article when I seatched for a twisted decrease. The green wool with the twisted stitch design is striking.

    ReplyDelete

Post a Comment

Popular posts from this blog

Substituting Yarn in a Project

By -
Image
So you’ve chosen your pattern, but either you don’t want to use the recommended yarn or you can’t find it to buy. This does not mean you are stuck. Many knitters, especially when they are just learning to knit, get stuck on the idea that you can only use the yarn that the pattern is written with. There are, occasionally, a few projects where it can be quite hard to find an alternative but that is very rare. There are a few factors that you want to think about when changing yarn.  Yarn Thickness The main one is the thickness of the yarn. This is the one factor that you absolutely have to consider. Everything else that I discuss below helps to hone your decision down but yarn thickness is at the core of a project. If you use a thicker yarn, it could make the fabric too dense and often make it impossible to match the gauge of the pattern. If you use a thinner yarn, then it will be more open and airy than intended; there’s more scope with this but some projects such as toys an...
Read more

Photo Tutorial: How to Back a Knitted Blanket

By -
Image
Recently, I was asked to help out with a project. This wonderful blanket (designed by Debbie Abrahams from her book, Blanket and Throws to Knit ) was knitted by Ann. I was asked to piece it together and back it. The finished blanket is being used to raise money for When you Wish Upon a Star. The yarn was donated by A Good Yarn and the fabric and cotton by L & C Fabrics . I thought I’d show you how I went about backing the blanket, I went about it as I would a quilt. Though, I decided tying would be the best way of layering it together, as traditional quilting would be difficult on a knitted fabric. 1. Block the blanket. I pinned it out and spritzed it. Normally, I would wet block, but I was concerned that the red may bleed and it would take some time to dry too. 2. My blanket was too large for a standard width so I pieced the backing. The backing should be a few inches larger than the knitted blanket. Place it right side down on the floor. I then tape it down o...
Read more

Photo Tutorial: Estonian Cast On

By -
Image
I've recently been looking into different cast on methods. I've tried quite a few and they've all got their purpose but I have taken quite a fancy to the Estonian Cast On (a.k.a. Double Start, Latvian). It's quite simple to execute, it's stretchy and can be quite decorative too. It works well with 1 x 1 and 2 x 2 ribbing because it wraps around the base of the column of ribbing. It's a super cast on for socks. The tutorial is for the single strand method. 1. Measure out a long tail. I tend to use 1 inch per stitch for thicker yarn and 1/2 inch per stitch for DK weight and thinner; plus another 6 inches for luck! Make a slip knot and place on your needle. 2. Place your fingers between the strands and tilt your hand back into a catapult position. This creates a cross on the thumb strand. 3. Insert your needle into the loop around your thumb from below. 4. Reach across over the top of the strand on your forefinger. 5. ...
Read more