FO: Ore

By -
I’ve finished the Ore Cardigan that I briefly mentioned here and here. The pattern is by Sarah Hatton and from Issue 70 of The Knitter. Here’s a review of the magazine with a picture of the original. The yarn I used was Sublime Baby Cashmere Merino Silk DK in colourway, Skipper. My Ravelry Project Page.

It’s a timeless classic piece and quite a simple knit. The beading is lovely and ensures that it hangs well.

IMG_1005

I did have an issue though, the sleeves came out way too long. It wasn’t my gauge as I had 29.5 rows instead of the recommended 28, which would have made the sleeve shorter. I really didn’t want to reknit the sleeves, so I took the more drastic option and cut the ends of the sleeves off. I ended up removing over 3 inches above the beading and then grafted the ends back on. I did have to increase a few stitches to make the stitch counts add up. I don’t think you can tell where I did it. Some sweater surgery later and now they fit a lot better.

The style of cardigan did seem to be for longer sleeves than normal but it is helpful, if they don’t come passed the ends of your hands!

IMG_1007

The back is just as pretty as the front.

IMG_1008

My Plume cardigan is still on the back burner, as I came home with more yarn this week (eek!). It’s a girl’s coat and I have the back done already, so hopefully have something to show you soon.

Comments

Post a Comment

Popular posts from this blog

Substituting Yarn in a Project

By -
Image
So you’ve chosen your pattern, but either you don’t want to use the recommended yarn or you can’t find it to buy. This does not mean you are stuck. Many knitters, especially when they are just learning to knit, get stuck on the idea that you can only use the yarn that the pattern is written with. There are, occasionally, a few projects where it can be quite hard to find an alternative but that is very rare. There are a few factors that you want to think about when changing yarn.  Yarn Thickness The main one is the thickness of the yarn. This is the one factor that you absolutely have to consider. Everything else that I discuss below helps to hone your decision down but yarn thickness is at the core of a project. If you use a thicker yarn, it could make the fabric too dense and often make it impossible to match the gauge of the pattern. If you use a thinner yarn, then it will be more open and airy than intended; there’s more scope with this but some projects such as toys an...
Read more

Photo Tutorial: How to Back a Knitted Blanket

By -
Image
Recently, I was asked to help out with a project. This wonderful blanket (designed by Debbie Abrahams from her book, Blanket and Throws to Knit ) was knitted by Ann. I was asked to piece it together and back it. The finished blanket is being used to raise money for When you Wish Upon a Star. The yarn was donated by A Good Yarn and the fabric and cotton by L & C Fabrics . I thought I’d show you how I went about backing the blanket, I went about it as I would a quilt. Though, I decided tying would be the best way of layering it together, as traditional quilting would be difficult on a knitted fabric. 1. Block the blanket. I pinned it out and spritzed it. Normally, I would wet block, but I was concerned that the red may bleed and it would take some time to dry too. 2. My blanket was too large for a standard width so I pieced the backing. The backing should be a few inches larger than the knitted blanket. Place it right side down on the floor. I then tape it down o...
Read more

Photo Tutorial: Estonian Cast On

By -
Image
I've recently been looking into different cast on methods. I've tried quite a few and they've all got their purpose but I have taken quite a fancy to the Estonian Cast On (a.k.a. Double Start, Latvian). It's quite simple to execute, it's stretchy and can be quite decorative too. It works well with 1 x 1 and 2 x 2 ribbing because it wraps around the base of the column of ribbing. It's a super cast on for socks. The tutorial is for the single strand method. 1. Measure out a long tail. I tend to use 1 inch per stitch for thicker yarn and 1/2 inch per stitch for DK weight and thinner; plus another 6 inches for luck! Make a slip knot and place on your needle. 2. Place your fingers between the strands and tilt your hand back into a catapult position. This creates a cross on the thumb strand. 3. Insert your needle into the loop around your thumb from below. 4. Reach across over the top of the strand on your forefinger. 5. ...
Read more